N-914 Rinseless Wash

McKee's 37 N-914 Rinseless Wash is formulated using a highly-advanced surfactant that does one thing and one thing only: clean your car without leaving a film behind that alters the look or water beading and sheeting characteristics of your wax, sealant, or coating. Safely remove dirt and grime in the convenience of your driveway or apartment complex parking lot without dragging out the hose. McKee's 37 N-914 Rinseless Wash enables you to wash your car the environmentally-friendly way, using 2 gallons or less! What's more, N-914 is 100% safe for use on matte and satin finishes as well!  Do you have a fiberglass or gel coat boat?  If you do, you're in luck - N-914 is safe for fiberglass and gel coat surfaces too!

Rinseless Wash:
If you want to use N-914 as a rinseless wash you'll use 1 ounce of N-914 for every 2 gallons of water (1:256), 3 capfuls of N-914 equals one ounce. So if you're going to use our 6 gallon bucket with the full 6 gallons you'll need 9 capfuls of N-914. Distilled or filtered water is recommended but not necessary.

Waterless Wash/Pre-Soak:
If you want to mix up a pre-soak or waterless wash solution you'll use 1 ounce of N-914 for every one gallon of water (1:128). That comes to 3 capfuls for every gallon of water. Distilled or filtered water is recommended but not necessary.

Clay Lube:
If you're wanting to use N-914 as a clay lube you'll use the same dilution as a waterless wash (1:128) 1 ounce to a gallon (3 capfuls in a gallon of water). Distilled or filtered water is recommended but not necessary.

Paint Prep:
You can also use N-914 as a paint prep before applying a coating or sealant. You'll need to mix up 1 ounce (3 capfuls) of N-914 with 8 ounces of water (1:8). This mixture will help you remove any polishing oils from your freshly corrected paint surface and allow better adhesion to the paint surface. Distilled or filtered water is recommended but not necessary.